Tin(IV) oxide (as Sn) |
Synonyms & Trade Names Stannic dioxide, Stannic oxide, White tin oxide [Note: Also see specific listing for Tin(II) oxide (as Sn).] |
CAS No. 18282-10-5 |
RTECS No. XQ4000000 |
DOT ID & Guide |
FormulaSnO2 |
Conversion |
IDLH N.D.
See: IDLH INDEX |
Exposure Limits NIOSH REL: TWA 2 mg/m3
OSHA PEL†: none |
Measurement Methods
NIOSH 7300 , 7301 , 7303
See: NMAM or OSHA Methods |
Physical Description White or slightly gray powder. |
MW: 150.7 |
BP: Decomposes |
MLT: 2966°F (Decomposes) |
Sol: Insoluble |
VP: 0 mmHg (approx) |
IP: NA |
Sp.Gr: 6.95 |
Fl.P: NA |
UEL: NA |
LEL: NA |
|
|
|
Incompatibilities & Reactivities Chlorine trifluoride |
Exposure Routes inhalation, skin and/or eye contact |
Symptoms Stannosis (benign pneumoconiosis): dyspnea (breathing difficulty), decreased pulmonary function |
Target Organs respiratory system |
|
Personal Protection/Sanitation (See protection codes)
Skin: No recommendation
Eyes: No recommendation
Wash skin: No recommendation
Remove: No recommendation
Change: No recommendation
|
First Aid (See procedures)
Eye: Irrigate immediately
Breathing: Fresh air
|
Respirator Recommendations Not available.
Important additional information about respirator selection |
| See also: INTRODUCTION See ICSC CARD: 0954
|
